ABB IRC5 Operating Manual page 266

5 Troubleshooting by event log
5.6 4 xxxx
Continued
Recovery: arg.
41416, Parameter Error
Description
Task: arg.
The symbol arg is not a module.
Program ref: arg.
Recommended actions
Check and change the RAPID program.
Recovery: arg.
41417, System Access Error
Description
Task: arg.
Cannot convert date.
Program ref: arg.
Recommended actions
Restart the controller and retry.
41419, Parameter Error
Description
Task: arg.
arg must be num, bool, string or dnum.
Program ref: arg.
Recommended actions
Check and change the RAPID program.
41420, Parameter Error
Description
Task: arg.
The argument type of arg is not compatible with cfg type.
Expected arg.
Program ref: arg.
Recommended actions
Recovery: arg.
41421, Parameter Error
Description
Task: arg.
Unknown cfg domain in argument arg.
Program ref: arg.
Recommended actions
Check and change the RAPID program.
Recovery: arg.
Continues on next page
266
41422, Parameter error
Description
Task: arg.
Unknown cfg type in argument arg.
Program ref: arg.
Recommended actions
Check and change the RAPID program.
Recovery: arg.
41423, Parameter Error
Description
Task: arg.
Unknown cfg instance in argument arg.
Program ref: arg.
Recommended actions
Check and change the RAPID program.
Recovery: arg.
41424, Parameter Error
Description
Task: arg.
Unknown cfg attribute in argument arg.
Program ref: arg.
Recommended actions
Check and change the RAPID program.
Recovery: arg.
41425, Parameter Error
Description
Task: arg.
The path 'arg' in argument arg is incorrect.
Program ref: arg.
Recommended actions
Check and change the path.
Recovery: arg.
41426, I/O Error
Description
Unable to access the I/O signal. Signal and I/O device unknown.
Consequences
Impossible to restart.
Probable causes
The connection with the I/O module is broken.
© Copyright 2005-2018 ABB. All rights reserved.
Operating manual - Troubleshooting IRC5
3HAC020738-001 Revision: AA