ABB IRC5 Operating Manual page 510

5 Troubleshooting by event log
5.10 11 xxxx
Continued
111709, Torch Services Error
Description
Torch services Wirecut configuration error. IO arg NOT found.
111710, Torch Services Error
Description
Torch services MechClean configuration error. Check PROC
cfg domain.
111711, Torch Services Error
Description
Torch services Spray configuration error. Check PROC cfg
domain.
111712, Torch Services Error
Description
Torch services Spray configuration error. Torch Services was
unable to find: arg/arg in PROC configuration.
111713, Torch Services Error
Description
Torch services Spray configuration error. Torch Services tried
to access an illegal type: arg/arg in PROC configuration.
111714, Torch Services Error
Description
Torch services Spray configuration error. Torch Services
experienced an unknown error trying to access: arg/arg in PROC
configuration.
111715, Torch Services Warning
Description
Torch services Spray has unconfigured IO.
111716, Torch Services Warning
Description
Torch services Wirecut has unconfigured IO.
111717, Torch Services Warning
Description
Torch services MechClean has unconfigured IO.
Continues on next page
510
111718, Torch Services Error
Description
Torch services MechClean Spray Liquid empty
Recommended actions
Refill Spray or check sensor
111751, Navigator Configuration Error
Description
Navigator configuration error. IO arg NOT found.
111752, Navigator Configuration Error
Description
Navigator configuration error. Navigator was unable to find:
arg/arg in PROC configuration.
111753, Navigator Configuration Error
Description
Navigator configuration error. Navigator tried to access an illegal
type: arg/arg in PROC configuration.
111754, Navigator Configuration Error
Description
Navigator configuration error. Navigator experienced an
unknown error trying to access: arg/arg in PROC configuration.
111755, Navigator error
Description
Sphere with name arg could not be localized.
Probable causes
Nominal point doesn't have sufficient accuracy.
Search radius is too small.
111756, Navigator Configuration Warning
Description
Navigator has unconfigured IO.
111900, Item target buffer full
Description
Target buffer full for Work Area arg.
Target number: arg.
Scene number arg.
© Copyright 2005-2018 ABB. All rights reserved.
Operating manual - Troubleshooting IRC5
3HAC020738-001 Revision: AA