ABB IRC5 Operating Manual page 114

5 Troubleshooting by event log
5.3 1 xxxx
Continued
11127, Backup error
Description
Error during the backup step Configuration.
Error while reading configuration parameters.
Consequences
The backup request is aborted.
No backup was created.
11128, Backup error
Description
Error during the backup step Configuration.
Error writing configuration parameters.
Consequences
The backup request is aborted.
No backup was created.
Probable causes
The destination is write protected. The controller has lost
contact with a mounted device (e.g. NFS, FTP, USB).
Recommended actions
Verify that the destination isn't write protected. Verify that
controller hasn't lost contact with a mounted device.
11129, Backup error
Description
Error during the backup step Configuration.
The given backup path is too long.
Consequences
The backup request is aborted.
No backup was created.
Probable causes
The given backup path has exceeded the maximum allowed
arg characters.
Recommended actions
Use a shorter path to where to create the backup.
11130, Backup error
Description
Error during the backup step Configuration.
No more objects.
Consequences
The backup request is aborted.
No backup was created.
Continues on next page
114
11136, Backup error
Description
Error during the backup step Configuration.
Write error.
Consequences
The backup request is aborted.
No backup was created.
Probable causes
The destination is write protected. The controller has lost
contact with a mounted device (e.g. NFS, FTP, USB).
Recommended actions
Verify that the destination isn't write protected. Verify that
controller hasn't lost contact with a mounted device.
11220, Backup error
Description
Error during the backup of Task.
Unknown error.
Consequences
The backup request is aborted.
No backup was created.
11222, Backup error
Description
Error during the backup of Task.
The backup already contains directories that are to be created.
Consequences
The backup request is aborted.
No backup was created.
11223, Backup error
Description
Error during the backup of Task.
The directory lacks at least one necessary item.
Consequences
The backup request is aborted.
No backup was created.
11224, Backup error
Description
Error during the backup of Task.
The directory does not exist.
© Copyright 2005-2018 ABB. All rights reserved.
Operating manual - Troubleshooting IRC5
3HAC020738-001 Revision: AA