ABB IRC5 Operating Manual page 429

90604, Tag/Attribute is empty or contains invalid
character(s)
Description
Tag/attribute arg, found on line arg, is empty or contains invalid
character(s).
Consequences
The system will stop all robot movements.
Probable causes
The safety configuration has not been created using
RobotStudio.
Recommended actions
Update the safety configuration.
90605, Net name attribute is missing
Description
The net name attribute on line arg is missing.
Consequences
The system will stop all robot movements.
Probable causes
The safety configuration has not been created using
RobotStudio.
Recommended actions
Update the safety configuration.
90606, Invalid net name
Description
The net name arg is invalid. Valid names are
arg.
Consequences
The system will stop all robot movements.
Probable causes
The safety configuration has not been created using
RobotStudio.
Recommended actions
Update the safety configuration.
90607, Net already exists
Description
The net arg, specified on line arg has already been specified.
Consequences
The system will stop all robot movements.
Operating manual - Troubleshooting IRC5
3HAC020738-001 Revision: AA
Probable causes
The safety configuration has not been created using
RobotStudio.
Recommended actions
Update the safety configuration.
90608, Could not create network instance
Description
Could not create network arg instance. It already exists.
Consequences
The system will stop all robot movements.
Probable causes
The safety configuration has not been created using
RobotStudio.
Recommended actions
Update the safety configuration.
90609, Device attribute is missing
Description
Device arg attribute arg is missing on line arg.
Consequences
The system will stop all robot movements.
Probable causes
The safety configuration has not been created using
RobotStudio.
Recommended actions
Update the safety configuration.
90610, Device already exists
Description
Device arg on line arg already exists.
Consequences
The system will stop all robot movements.
Probable causes
The safety configuration has not been created using
RobotStudio.
Recommended actions
Update the safety configuration.
90611, Device create failed
Description
Device arg failed. The device already exists.
© Copyright 2005-2018 ABB. All rights reserved.
5 Troubleshooting by event log
Continues on next page
5.9 9 xxxx
Continued
429