ABB IRC5 Operating Manual page 509

111636, DB Table Created
Description
The table, tblTchClean, was successfully added to the WebWare
database.
111637, DB Table Creation Failed
Description
Failed to create WebWare table: tblNavigSrchSp.
Consequences
Production Monitor will be unable to log data to the database.
Recommended actions
Check the WebWare server.
111638, DB Table Created
Description
The table, tblNavigSrchSp, was successfully added to the
WebWare database.
111639, DB Table Creation Failed
Description
Failed to create WebWare table: tblNavigMeas1D.
Consequences
Production Monitor will be unable to log data to the database.
Recommended actions
Check the WebWare server.
111640, DB Table Created
Description
The table, tblNavigMeas1D, was successfully added to the
WebWare database.
111641, DB Table Creation Failed
Description
WebWare database tables must be created in Automatic Mode.
Consequences
Production Monitor will be unable to log data to the database.
Recommended actions
Switch to Automatic Mode and try again.
Operating manual - Troubleshooting IRC5
3HAC020738-001 Revision: AA
111701, Torch Services Error
Description
Torch services MechClean configuration error. IO arg NOT
found.
111702, Torch Services Error
Description
Torch services MechClean configuration error. Check PROC
cfg domain.
111703, Torch Services Error
Description
Torch services MechClean configuration error. Torch Services
was unable to find: arg/arg in PROC configuration.
111704, Torch Services Error
Description
Torch services MechClean configuration error. Torch Services
tried to access an illegal type: arg/arg in PROC configuration.
111705, Torch Services Error
Description
Torch services MechClean configuration error. Torch Services
experienced an unknown error trying to access: arg/arg in PROC
configuration.
111706, Torch Services Error
Description
Torch services Wirecut configuration error. Torch Services was
unable to find: arg/arg in PROC configuration.
111707, Torch Services Error
Description
Torch services Wirecut configuration error. Torch Services tried
to access an illegal type: arg/arg in PROC configuration.
111708, Torch Services Error
Description
Torch services Wirecut configuration error. Torch Services
experienced an unknown error trying to access: arg/arg in PROC
configuration.
© Copyright 2005-2018 ABB. All rights reserved.
5 Troubleshooting by event log
Continues on next page
5.10 11 xxxx
Continued
509