ABB IRC5 Operating Manual page 564

5 Troubleshooting by event log
5.12 13 xxxx
Continued
Recommended actions
Contact customer service.
134060, XML-parser error
Description
Third dimension passed to XML-parser was not big enough.
Recommended actions
Contact customer service.
134061, XML-parser overflow
Description
There were too many options in the file: arg
Consequences
Only arg options were parsed.
Recommended actions
Remove some options or increase the buffer size.
134062, XML-parser error
Description
Could not open the file: arg for reading.
Recommended actions
Make sure the file exists, and is accessible.
134063, XML-parser error
Description
Did not find a specified set of symbols.
Recommended actions
Fix the markup in the XML file.
134064, CSV-parser error
Description
Row out of range in the file: arg
Consequences
The rows out of range in the file will be skipped.
Recommended actions
Remove the offending rows, or increase the buffer size.
134065, CSV-parser error
Description
Encountered a row number that was not a positive integer in
the file: arg
Continues on next page
564
Consequences
The row/line in the file will be skipped.
Recommended actions
Change the row number to a positive integer.
134066, CSV-parser error
Description
There were too many columns on a row in the file: arg
Consequences
The remaining columns on the row/line in the file will be skipped.
Recommended actions
Reduce the amount of columns, or increase the buffer size.
134067, CSV-parser error
Description
Could not open the file: arg for reading.
Recommended actions
Make sure the file exists, and is accessible.
134068, Configuration error
Description
A semaphore timeout occured when parsing the file: arg.xml
Consequences
The option "arg" will be set to zero.
Recommended actions
P-Start the controller to force a re-read of all configuration files.
134100, CBS servo not enabled.
Description
CBS servo was not enabled when deciding to do material
change.
Consequences
The material change or maintenance operation will be skipped.
Recommended actions
Enable the CBS servo.
134101, CBS restarted while performing
operations.
Description
CBS was restarted in state: arg
Consequences
The CBS is in an unreliable state.
© Copyright 2005-2018 ABB. All rights reserved.
Operating manual - Troubleshooting IRC5
3HAC020738-001 Revision: AA