ABB IRC5 Operating Manual page 118

Troubleshooting
Hide thumbs Also See for IRC5:
Table of Contents

Advertisement

5 Troubleshooting by event log
5.3 1 xxxx
Continued
12230, Restore error
Description
Error during the restore of Task.
No more objects
12231, Restore error
Description
Error during the restore of Task.
The directory lacks at least one necessary item.
12236, Restore error
Description
Error during the restore of Task.
Write error.
12320, Restore error
Description
Error during the restore of User Task.
Unknown error.
12323, Restore error
Description
Error during the restore of User Task.
The directory lacks at least one necessary item.
12338, Restore error
Description
Error during the restore of User Task.
Unknown task.
12341, Restore error
Description
Error during the restore of Controller Settings.
12342, Restore error
Description
Error during the restore of Safety Settings.
12510, Network subnet mask illegal
Description
The subnet mask arg for network interface arg is illegal.
Continues on next page
118
Consequences
The network interface will not be configured, and may not be
used.
Probable causes
The network subnet mask may be mistyped.
Recommended actions
Make sure the network subnet mask is correct.
12511, Network interface IP address illegal
Description
The network IP address arg for interface arg is illegal/missing.
Consequences
The interface will not be configured, and may not be used.
Probable causes
The network IP address may be mistyped or it already exists
on the network.
Recommended actions
Make sure the interface IP address is correct and not a
duplicate.
12512, Network gateway IP address illegal
Description
The gateway IP address arg is illegal/missing or the destination
IP address arg is illegal.
Consequences
The network will not be reached, and may not be used.
Probable causes
The gateway IP and/or destination IP addresses may be
mistyped.
Recommended actions
Make sure the gateway IP and destination IP addresses are
correct.
12513, No parameters from the DHCP server
Description
The network interface arg has not received any parameters
from the DHCP server.
Consequences
The interface will not be configured, and may not be used.
Probable causes
The LAN connection is not working -The DHCP server is not
activated.
© Copyright 2005-2018 ABB. All rights reserved.
Operating manual - Troubleshooting IRC5
3HAC020738-001 Revision: AA

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents