Crypto_Ddata0Byte32 - Ddata0 Register Byte 32 Access (No Bit Access) - Silicon Laboratories EFR32xG14 Wireless Gecko Reference Manual

31.6.40 CRYPTO_DDATA0BYTE32 - DDATA0 Register Byte 32 Access (No Bit Access)

Offset
0x148
Reset
Access
Name
Bit Name
31:4 Reserved
3:0 DDATA0BYTE32
Access to DDATA0 byte 32. This is used when RESULTWIDTH in CRYPTO_WAC is set to 260BIT.
31.6.41 CRYPTO_QDATA0 - QDATA0 Register Access (No Bit Access) (Actionable Reads)
Offset
0x180
Reset
Access
Name
Bit Name
31:0 QDATA0
Access to QDATA0, which is equal to {DDATA1, DDATA0}. 16x32bits read/write accesses are required to fully read/write
QDATA0.
silabs.com | Building a more connected world.
Reset Access Description
To ensure compatibility with future devices, always write bits to 0. More information in
tions
0xX RWH Ddata 0 Byte 32 Access
Reset Access Description
0xXXXXXXX RWH Quad Data 0 Access
X
Bit Position
Bit Position
Reference Manual
CRYPTO - Crypto Accelerator
1.2 Conven-
Rev. 1.1 | 1079