31.6.24 CRYPTO_DATA0XOR - DATA0XOR Register Access (No Bit Access) (Actionable Reads)
Offset
0x0A0
Reset
Access
Name
Bit
Name
31:0
DATA0XOR
Any value written to this register will be XOR'ed with the value of DATA0. The result is stored in DATA0. Reads return DA-
TA0 directly. 4x32bits read/write accesses are required to perform a full XOR write to DATA0
31.6.25 CRYPTO_DATA0BYTE - DATA0 Register Byte Access (No Bit Access) (Actionable Reads)
Offset
0x0B0
Reset
Access
Name
Bit
Name
31:8
Reserved
7:0
DATA0BYTE
Access to DATA0. 16x8bits read/write accesses are required to fully read/write DATA0. Accesses must be performed in
multiples of 4, or data incoherency may occur
silabs.com | Building a more connected world.
Reset
Access
Description
0xXXXXXXX
RWH
XOR Data 0 Access
X
Reset
Access
Description
To ensure compatibility with future devices, always write bits to 0. More information in
tions
0xXX
RWH
Data 0 Byte Access
Bit Position
Bit Position
Reference Manual
CRYPTO - Crypto Accelerator
1.2 Conven-
Rev. 1.1 | 1071
Need help?
Do you have a question about the EFR32xG14 Wireless Gecko and is the answer not in the manual?
Questions and answers