Bgp Regex-Eval-Optz-Disable - Dell Z9500 Command Reference Manual

Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.2(1.0)
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.7.1.0
Version 7.2.1.0
Usage
This command is a knob to disable BGP next-hop resolution using BGP learned
Information
routes. During the next-hop resolution, only the first route that the next-hop
resolves through is verified for the route's protocol source and is checked if the
route is learned from BGP or not.
The clear ip bgp command is required for this command to take effect and to
keep the BGP database consistent. Execute the clear ip bgp command right
after executing this command.
Related clear ip bgp
Commands

bgp regex-eval-optz-disable

Disables the Regex Performance engine that optimizes complex regular expression with BGP.
Z9500
Syntax
bgp regex-eval-optz-disable
To re-enable optimization engine, use the no bgp regex-eval-optz-disable
command.
Defaults Enabled
Command ROUTER BGP (conf-router_bgp)
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Border Gateway Protocol
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced.
— clears the ip bgp.
383