Vrrp; Vrrp Virtual Routers - Siemens SCALANCE X-300 Configuration Manual

Configuration using Web Based Management and Command Line Interface
4.7 The Router menu (SCALANCE X414-3E)
Syntax of the Command Line Interface
Table 4- 100 OSPFv2 State Database - CLI\ROUTER\OSPF>
Command
lnkstate
Note
For more detailed information on LSAs, refer to the section on configuration and diagnostics
over SNMP.
4.7.13

VRRP

Introduction
In the submenus of the "VRRP" menu, you can set the VRRP parameters.
The VRRP introduces redundancy to the IPv4 network. Various IP routers can take over the
routing functionality of another router if the actual router fails. To allow this, several routers in
an IP subnet are grouped together to form one virtual router This virtual router is assigned a
list of IPv4 addresses for which the relevant master takes on the routing functionality.
4.7.14

VRRP Virtual Routers

Introduction
In this dialog, you can monitor the virtual routers of this system.
With the "New Entry" button, you can create new virtual routers.
A maximum of 32 virtual routers can be configured.
312
Description
Displays the current links state
table.
Configuration Manual, 10/2014, C79000-G8976-C187-22
Comment
-
SCALANCE X-300 / X-400