Adding An Ncc - Siemens Scalance X204-2 Multimode Installation Instructions Manual

Adding An NCC

Siemens Industry, Inc.
Building Technologies Division
Figure 34
NCC Network Node Map
To add an NCC node, complete the following steps (refer to Figure 35):
• Click on the Add button.
• Next, type in the Node number to match the Node number from the Zeus
configuration (1-64).
• Add a Node Name.
• Choose "NCC-G" as the Node Type.
• Choose the Type of NCC-G Node as either "This Unit" or "Remote Unit. "
• Type the TCP/IP Network Address as the IP address of the NCC PC.
• Click the Save button.
26 P/N 315-050537-3