Fiber Optic Ethernet Port Specifications; Operating Environment - Siemens SIMATIC NET RUGGEDCOM PSG907R Installation Manual

Standard
IEEE 802.3
IEEE 802.3ad
IEEE 802.3ae
IEEE 802.3u
IEEE
1588-2008
IEC
62439-2:2016
IEC
62439-3:2016
5.4

Fiber Optic Ethernet Port Specifications

The following details the specifications for fiber Ethernet ports that can be ordered
with the RUGGEDCOM RSG907R.
Note
• All optical power numbers are listed as dBm averages. To convert from average
to peak, add 3 dBm. To convert from peak to average, subtract 3 dBm.
• Maximum segment length is greatly dependent on factors such as fiber quality,
and the number of patches and splices. Consult a Siemens sales associate when
determining maximum segment distances.
Data Mode Connector Cable
Rate
(Mbps)
100 MM LC
100 MM LC
a
Typical.
5.5

Operating Environment

The RUGGEDCOM RSG907R is rated to operate under the following environmental
conditions.
Ambient Operating
Temperature
Ambient Storage Temperature
Ambient Relative Humidity
Maximum Altitude
a
Measured from a 30 cm (12 in) radius surrounding the center of the enclosure.
RUGGEDCOM RSG907R
Installation Manual, 02/2021, C79000-G8976-1387-12
All manuals and user guides at all-guidesbox.com
10 Mbps 100 Mbps
Ports Ports
•
•
•
•
•
Wavelength
a
(μm) (nm)
Transmit Receive
50/125 1308 1308
62.5/125 1308 1308
-40 to 85 °C (-40 to 185 °F)
ab
-40 to 85 °C (-40 to 185 °F)
c
5% to 95%
2000 m (6562 ft)
5.4 Fiber Optic Ethernet Port Specifications
1000 Mbps Ports
• •
•
•
• •
• •
• •
Transmit Receiver
Power (dBm) Sensitivity
(dBm)
Min Max
-22.5 -14 -31
-20 -14 -31
Technical Specifications
Notes
10Base-T
Link aggregation
10GBase
100Base-TX/100Base-FX
Precision Time Control
(PTP) Version 2
Media Redundancy
Protocol (MRP)
High-Availability Seamless
Redundancy (HSR), Parallel
Redundancy Protocol (PRP)
Receiver Distance Power
a
Saturation (km) Budget
(dBm)
-14 2 11
-14 2 11
33