Changing The Filter Pad - Siemens SCALANCE XR524-8C Operating Instructions Manual

Scalance xr-500 series. simatic net. industrial ethernet switches
Hide thumbs Also See for SCALANCE XR524-8C:
Table of Contents

Advertisement

Upkeep and maintenance

7.2 Changing the filter pad

7.2
Changing the filter pad
The following devices have a filter pad:
● SCALANCE XR528-6M
● SCALANCE XR552-12M
NOTICE
Damage to the device due to inadequate ventilation
A badly contaminated filter reduces air flow and can cause the device to be damaged.
Check the degree of contamination of the filter regularly and clean or replace the filter mat
as necessary.
Procedure
Follow the steps below to replace the filter pad:
1. Unlock the door in the housing by pushing the catch to the right with a slotted screwdriver
Figure 7-3
2. Open the door in the housing
78
.
Opening the housing of a SCALANCE XR552-12M. SCALANCE XR528-6M is used
analogously.
.
Operating Instructions, 05/2017, A5E03275845-11
SCALANCE XR-500

Advertisement

Table of Contents
loading

Table of Contents