Table of Contents
Advertisement
Connecting up
5.5 Serial interface
5.5
Serial interface
Information on the serial interface
• Via the serial interface (RJ-11 jack), you can access the CLI of the device directly via an RS-232
connection (115200 8N1) without assigning an IP address.
• Access to the device is also possible independent of the Ethernet ports.
• To connect the serial interface to the PC, you require a cable with an RJ-11 plug and 9-pin D-
sub female connector. You can order the connecting cable for the serial interface as
an accessory (Page 20).
Position and assignment
Figure 5-2
50
s
Position and pin assignment of the serial interface (RJ-11 jack), for example on the
SCALANCE XB213-3
1
2
3
4
5
6 6
5
4
3
2
1
9
8
7
6
Operating Instructions, 02/2023, C79000-G8976-C676-01
SCALANCE XF-200G
Advertisement
Table of Contents
