Modifying Job Names; Modifying Job Names On The Job Content Window - YASKAWA DX100 Operator's Manual

155507-1CD
DX100
5.3

5.3.0.1 Modifying Job Names on the JOB CONTENT Window

5 Editing Jobs

5.3 Modifying Job Names

Modifying Job Names
This operation is used to modify the name of a job that is registered. The
operation can be performed in either the JOB CONTENT window or the
JOB LIST window.
1. Select {JOB} under the main menu.
2. Select {JOB}.
– The JOB CONTENT window appears.
3. Select {JOB}  {RENAME JOB} under the pull-down menu.
4. Input the job name.
– Input the new job name.
– The name of the source job is displayed on the input area. It is
possible to partially change this name to enter a new name.
See section 1.2.6 "Character Input Operation" on page 1-18
SUPPLE-
for information on letter input operations.
MENT
5-7
233 of 554
RE-CSO-A037