Got Ethernet Setting - Mitsubishi Electric GOT2000 Series Connection Manual

1.1.2

GOT Ethernet Setting

The GOT can be connected to a different network by using the following network.
1) GOT IP Address Setting
Set the following communication port setting.

Standard port (When using GT25-W, port 1)
Set [GOT IP Address] and [Subnet Mask] in the standard port with a built-in GOT, or port 1.

Extension port (When using GT25-W, port 2)
Set [GOT IP Address] and [Subnet Mask] in the extension port (the Ethernet interface for the Ethernet
communication module), or port 2 with a built-in GOT.
When using the GOT other than GT25-W, BootOS Version Z or later is required to use the extension port.
For details on writing the BootOS, refer to the following manual.
➠
 Wireless LAN
Set [GOT IP Address], [Subnet Mask], [Peripheral S/W Communication Port No.], and [Transparent Port No.]
for the wireless LAN interface.
2) GOT Ethernet Common Setting
Set the following setting which is common to the standard port and the extension port, or port 1 and port 2.
• [Default Gateway]
• [Peripheral S/W Communication Port No.]
• [Transparent Port No.]
3) IP Filter Setting
By configuring the IP filter setting, the access from the specific IP address can be permitted or shut off.
■1. GOT IP Address Setting
Set the GOT IP address.
(1) [Standard Port] or [Port 1]
The following shows an example for [Standard Port].
Step 1.
Select [Common] → [GOT Ethernet Setting] → [GOT IP Address Setting] from the menu to display the
[GOT Ethernet Setting] window.
Step 2.
On the [Standard Port] tab, configure the following settings.
Item
Update GOT Ethernet standard
port setting
GOT IP Address
Subnet Mask
Select from GOT Setting List
1 - 14
1.1 Setting the Communication Interface
GT Designer3 (GOT2000) Screen Design Manual
The GOT Ethernet standard port settings are applied on GOT.
Set the IP address of the GOT IP Address.
(Default:192.168.3.18)
Set the subnet mask for the sub network. (Only for connection via router)
If the sub network is not used, the default value is set.
(Default: 255.255.255.0)
Select the GOT set in [GOT Setting List] dialog.
➠
GT Designer3 (GOT2000) Screen Design Manual
Description Range
-
0.0.0.0 to 255.255.255.255
0.0.0.0 to 255.255.255.255
-