Got Ip Address Setting (Ethernet Models Only); Standard; Display Operation Of Got Ip Address - Mitsubishi Electric GOT2000 Series User Manual

11.2 GOT IP Address Setting (Ethernet models only)

This section describes the GOT Ethernet setting.
The GOT Ethernet setting can also be set with drawing software. For details, refer to the following.
➠ GT Designer3 (GOT2000) Help
11.2.1

Standard

The table below shows the communication setting items and setting range.
Communication setting items
IP address
*1
Subnet mask
*1
Default gateway
Per. S/W port No.
Transparent port No.
*1 Set the value "0.0.0.0" when not using the subnet mask pattern and default router IP address.
11.2.2

Display operation of GOT IP address

Main menu
GOT IP address
(For GT2107-W, GT2104-R)
Setting range
0.0.0.1 to 223.255.255.254
192.0.0.0 to 255.255.255.252
0.0.0.1 to 223.255.255.254
1024 to 5010, 5014 to 49152,
49171 to 65534
1024 to 5010, 5014 to 49152,
49171 to 65534
Touch
[Comm. Settings].
11.2 GOT IP Address Setting (Ethernet models only)
Remark
If a value outside the setting range is entered, the error
message "SET NUMBER IS INCORRECT." appears.
Set the port number for the GOT download.
Set the port number for the transparent of the GOT.
Communication settings
Touch
[GOT IP Address].
GOT IP address
(For GT2104-P, GT2103-P)
GOT IP address
(For GT2104-P, GT2103-P)
11
11 - 17