Mitsubishi Electric GOT2000 Series Connection Manual page 45

(3) [Wireless LAN]
Step 1.
Select [System] → [GOT Setup] → [GOT Ethernet Setting] → [GOT IP Address Setting] → [Wireless LAN]
from the menu.
Step 2.
Set the followings.
Item
Update GOT wireless LAN I/F setting
Enable wireless LAN I/F
GOT IP Address
Subnet Mask
Select from GOT Setting List.
Specifying the port number for the
wireless LAN
Peripheral S/W Communication Port No.
Transparent Port No.
Driver setting
POINT POINT POINT
GOT IP address
For GOT IP address of each Ethernet setting, set a value that network system is different from
each other.
(When the subnet mask is [255.255.255.0])
The wireless LAN interface settings are applied on GOT.
Enable the wireless LAN.
Set the IP address of the wireless LAN I/F.
(Default:192.168.4.20)
Set the subnet mask for the sub network. (Only for connection via
router)
If the sub network is not used, the default value is set.
(Default: 255.255.255.0)
Select the GOT set in [GOT Setting List] dialog.
➠
GT Designer3 (GOT2000) Screen Design Manual
Enable the port number setting for the wireless LAN separately from
GOT Ethernet common setting.
Set the GOT port No. for the communication with the peripheral S/W.
(Default: 5015)
Set the GOT port No. for the transparent function.
(Default: 5014)
Display [Detail Settings] dialog,
➠
GT Designer3 (GOT2000) Screen Design Manual
GOT standard GOT extension
Ethernet setting Ethernet setting
192.168.3.18 192.168.5.22
Set a value that network system
is different from each other.
Description
GOT wireless
LAN I/F setting
192.168.4.20
1.1 Setting the Communication Interface
Range
-
-
0.0.0.0 to 255.255.255.255
0.0.0.0 to 255.255.255.255
-
-
1024 to 65534 (Except for 5011
to 5013, 49153 to 49170)
1024 to 65534 (Except for 5011
to 5013, 49153 to 49170)
-
1 - 15
1