Got Ethernet Setting - Mitsubishi Electric GOT2000 Series Connection Manual



GOT Ethernet setting

Item Description
Set the IP address of the GOT.
GOT IP Address
(Default: 192.168.0.18)
Set the subnet mask for the sub
network.(Only for connection via
router)
Subnet Mask
If the sub network is not used, the
default value is set.
(Default: 255.255.255.0)
Set the router address of the
default gateway where the GOT is
Default
connected.(Only for connection
Gateway
via router)
(Default: 0.0.0.0)
Peripheral S/W Set the GOT port No. for the S/W
Communication communication.
Port No. (Default: 5015)
Set the GOT port No. for the
Transparent Port
transparent function.
No.
(Default: 5014)

Ethernet setting
(1) Ethernet connection type: EtherNet/IP (AB)
This section describes the Ethernet setting for the
communication driver AB Control/CompactLogix.
Range
0.0.0.0 to
255.255.255.255
0.0.0.0 to
Host
255.255.255.255
Net No.
0.0.0.0 to
*1
Station
255.255.255.255
Type
1024 to 5010,
5014 to 65534
(Except for 5011,
IP address
5012, 5013 and
49153)
Port No.
1024 to 5010,
Communication
5014 to 65534
format
(Except for 5011,
5012, 5013 and
Slot No.
49153)
10. CONNECTION TO ALLEN-BRADLEY PLC
Item Description
The host is displayed.(The host is
indicated with an asterisk (*).)
Set the network No. of the connected
Ethernet module.
(Default: blank)
Set the station No. of the connected
Ethernet module.
(Default: blank)
AB(EtherNet/IP) (fixed)
Set the IP address of the connected
Ethernet module.
(Default: blank)
44818 (fixed)
TCP (fixed)
Set the slot No. of the PLC to which
the Ethernet module is connected.
(Default: blank)
*1 Each of [GOT Station] set in the communication detail setting
and [Station] set in the Ethernet setting must be set to
different station numbers.
■
Communication detail settings
10.3 Ethernet Connection
Set value
―
1 to 239
1 to 64
AB(EtherNet/
IP) (fixed)
10
PLC side IP
address
44818 (fixed)
TCP (fixed)
0 to 16
10 - 17