Tandberg System Connections - Avaya TANDBERG 150 MXP Installation Instructions Manual

3. Tandberg System Connections

Figure 1 through Figure 4 contain photographs of various views of the T150. The connections
that can be made to the T150 are highlighted in Figure 4 and are as listed below. Figure 4 is
best viewed online in order to clearly see the annotations that were added to the image.
1. Power connection from external AC/DC adapter labeled "48V DC".
2. RJ45 jack for a 10/100 Ethernet connection to the enterprise LAN. This jack is labeled
"Ethernet".
3. Optional: RJ45 jack for a 10/100 Ethernet connection to an associated PC. This jack is
labeled "PC" and is just to the left of the Ethernet jack (while looking at the bottom of the
unit).
4. Optional: 2.5 mm, 3-pole jack for a headset. This jack is labeled with a headset symbol.
5. Optional: Modular handset jack. This jack is labeled with a handset symbol.
Additional notes on the photographs are as follows:
The optional "PC" jack is not shown as being used in the photographs (i.e. it is not shown
with an Ethernet cable connected).
Figure 2 highlights the Settings key (wrench icon) which is used to access the
Administrator Settings menu on the T150.
Serial number, hardware revision, and MAC address are printed on labels applied to the
bottom of the unit as shown Figure 4.
Issue 1.0
1/10/2008
DTMF over IP: in-band
Figure 1 – Front View of TANDBERG 150 MXP
2008 Avaya Inc. All Rights Reserved.
IP Video? y
8 of 13