Traffic Descriptor - Data; Vlan Profile With Ghost Objects - Alcatel-Lucent 1850 User Provisioning Manual

Menu bar
............................................................................................................................................................................................................................................................
Figure 3-24 Traffic descriptor - Data
To configure a new traffic descriptor, click Create to configure a data traffic descriptor
tab. See
VLAN profile
VLAN registration is not be applicable to MAC Bridge case. Select Data -> VLAN
profile as shown in
User Label - This is the name of the VLAN profile.
•
Ethernet type - The value identifies the network provider and has to be 2-bytes long
•
in hexadecimal notation; the third non-included byte is forced by default to "0x".
Validating the check box Show ghost object the column State is shown where the status of
the VLAN is displayed as shown in
Figure 3-25 VLAN profile with ghost objects
The Delete hyperlink is to select one or more VLAN profile to delete from the list.
............................................................................................................................................................................................................................................................
3 - 36
"Create traffic descriptor (data)" (p. 5-23).
Figure 3-25.
a) without ghost objects
b) with ghost objects
Figure 3-25.
Data menu
8DG08763KAAA
Issue 1 February 2009