Table of Contents
Advertisement
Run the Web-Based Manager (optional)
To configure the Avaya P130 you can use the P130 Web-based Manager in addition to
using the CLI.
System Requirements
Minimum hardware and Operating System requirements are:
•
Windows® 95 or NT® 4.0 or higher
•
Pentium® 200 Mhz-based computer with 64 Mb of RAM (Pentium-II recommended)
•
Minimum screen resolution of 1024 x 768 pixels
•
Microsoft® Internet Explorer® 4 or higher or
Netscape Navigator® 4.x or higher
•
Sun Microsystems Java™ plug-in (supplied on the "Documentation and Utilities" CD)
Refer to the Release Notes for the exact version of the Java plug-in
Running the Embedded Manager
Assign an IP address to the P130 before starting this procedure.
1.
Open your browser.
2.
Enter the URL of the switch in the format http://aaa.bbb.ccc.ddd
aaa.bbb.ccc.ddd is the IP address of the switch.
You are prompted to log into the switch.
The user name is "root".
The default password for read-write access is "root".
The Web management passwords are the same as those of the CLI. If you have created
additional CLI user names or changed the default passwords then you can use those
passwords for Web management as well.
The welcome page is displayed:
6
Advertisement
Table of Contents
