Version 8.3.16.0
Example
FTOS(conf)# show qos dcb-input
(Summary)
dcb-input pfc-profile
dcb-input pfc-profile1
show stack-unit stack-ports pfc detail
Displays the PFC configuration applied to ingress traffic on stacked ports, including PFC Operational mode on each unit
with the configured priorities, link delay, and number of pause packets sent and received.
S4810
Syntax
show stack-unit {all | stack-unit} stack-ports {all | port-
number} pfc detail
Parameters
stack-unit
port-number
Command Modes
EXEC Privilege
Command History
Version 8.3.12.0
Version 8.3.16.0
Example
FTOS(conf)# show stack-unit all stack-ports all pfc details
(Summary)
stack unit 0 stack-port all
stack unit 1 stack-port all
ETS Commands
The following ETS commands are supported on the S4810 platform.
Introduced on the MXL 10/40GbE Switch IO Module.
pfc link-delay 32
pfc priority 0-1
no pfc mode on
pfc priority 6-7
Enter the stack unit.
Enter the port number.
Introduced on the S4810.
Introduced on the MXL 10/40GbE Switch IO Module.
Admin mode is On
Admin is enabled, Priority list is 4-5
Local is enabled, Priority list is 4-5
Link Delay 45556 pause quantum
0 Pause Tx pkts, 0 Pause Rx pkts
Admin mode is On
Admin is enabled, Priority list is 4-5
Local is enabled, Priority list is 4-5
Link Delay 45556 pause quantum
0 Pause Tx pkts, 0 Pause Rx pkts
607