Show Auth-Web Statistics Interface - Allied Telesis AT-IX5-28GPX Manual

A C
UTHENTICATION OMMANDS
-
SHOW AUTH WEB STATISTICS INTERFACE

show auth-web statistics interface

Overview This command shows the authentication statistics for the specified interface,
which may be a static channel (or static aggregator) or a dynamic (or LACP)
channel group or a switch port.
Syntax
show auth-web statistics interface <interface-list>
Mode Privileged Exec
Example To display Web-Authentication statistics for port1.0.4, enter the command:
awplus#
Related show dot1x interface
Commands
1130 Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
Parameter
<interface-list> The interfaces or ports to configure. An interface-list can be:
show dot1x statistics interface port1.0.4
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
Description
• an interface (e.g. vlan2), a switch port (e.g. port1.0.6),
a static channel group (e.g. sa2) or a dynamic (LACP)
channel group (e.g. po2)
• a continuous range of interfaces, ports, static channel
groups or dynamic (LACP) channel groups separated by a
hyphen; e.g. vlan2-8, or port1.0.1-1.0.4, or sa1-2,
or po1-2
• a comma-separated list of the above; e.g.
port1.0.1,port1.0.4-1.0.6. Do not mix interface
types in a list
The specified interfaces must exist.
C613-50057-01 REV A