NEC Univerge SV8100 Features And Specifications Manual page 273

UNIVERGE SV8100
Program
Program Name
Number
20-11-24 Class of Service Options (Hold/
Transfer Service) – Trunk Park
Hold Mode
20-11-25 Class of Service Options (Hold/
Transfer Service) – Transfer Park
Call
20-11-27 Class of Service Options (Hold/
Transfer Service) – Call Park
Automatically Search
20-12-02 Class of Service Options
(Charging Cost Service) –
Advice of Charge
20-12-03 Class of Service Options
(Charging Cost Service) – Cost
Display (TTU)
20-13-01 Class of Service Options
(Supplementary Service) – Long
Conversation Alarm
20-13-02 Class of Service Options
(Supplementary Service) – Long
Conversation Cutoff (Incoming)
20-13-03 Class of Service Options
(Supplementary Service) – Long
Conversation Cutoff (Outgoing)
20-13-04 Class of Service Options
(Supplementary Service) – Call
Forward/DND Override (Bypass
Call)
20-13-05 Class of Service Options
(Supplementary Service) –
Intercom Off-Hook Signaling
20-13-06 Class of Service Options
(Supplementary Service) –
Automatic Off-Hook Signaling
(Automatic Override)
SV8100 Features and Specifications Manual
Description/Comments
Set the hold type when a trunk call
is put on hold by an extension.
Turns On or off an extension user
ability to transfer a parked call.
Use this option to Turns On (1) or
Off (0) using the Call Park
Automatically Search option.
ISDN-AOC
This option Turns Off (0) or On (1) a
DISA or tie trunk caller's ability to
dial 9 for Trunk Group Routing or
Automatic Route Selection.
ISDN billing information
Turns Off (0) or On (1) the Warning
Tone for Long Conversation (not for
single line telephones).
Turns Off or On an extension user
ability to use Long Conversation
Cutoff for incoming calls.
Turns Off or On an extension user
ability to use Long Conversation
Cutoff for outgoing calls.
Turns On or Off the ability to use
Call Forwarding/DND Override.
Turns On (1) or Off (0) the ability of
an extension to receive Off-Hook
Signals.
Allows a busy extension ability to
Manually (0) or Automatically (1)
receive Off-Hook signals.
Assigned Data
1
0 = Non Exclusive Hold
(Off)
1 = Exclusive Hold
(On)
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
Issue 1.0
Level
2 3
2 - 249