REMOVAL
1.
REMOVE FRONT WHEEL ARCH MOULDING
HINT:
Tape a screwdriver tip before use.
(a)
Remove the 6 screws and a clip.
(b)
Using the screwdriver, pry up the wheel arch moulding, and remove it.
2.
REMOVE REAR WHEEL ARCH MOULDING
HINT:
Tape a screwdriver tip before use.
(a)
Remove the screw and 5 clips.
(b)
Using the screwdriver, pry up the wheel arch moulding, and remove it.
1996 TOYOTA T100 (RM449U)
BODY
−
WHEEL ARCH MOULDING
BO−17
BO0E7−01