Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.2.1.1
Usage
Enable the multiple spanning tree protocol prior to using this command.
Information
Example
Dell#show spanning-tree mst configuration
MST region name: CustomerSvc
Revision: 2
MSTI VID
Dell#
show spanning-tree msti
View the multiple spanning tree instance.
S4810
Syntax
show spanning-tree msti [instance-number [brief]] [guard]
Parameters
instance-
number
brief
guard
Command
•
Modes
•
Multiple Spanning Tree Protocol (MSTP)
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
10 101-105
(Optional) Enter the multiple spanning tree instance number.
The range is from 0 to 63.
(Optional) Enter the keyword brief to view a synopsis of the
MST instance.
(Optional) Enter the keyword guard to display the type of
guard enabled on an MSTP interface and the current port
state.
EXEC
EXEC Privilege
1135