Autodesk 24000-000000-9860 - Revit Architecture - PC User Manual page 1594

See Selecting Multiple Elements
selection filter A mechanism for determining which elements are selected (for modification or manipulation)
based on their family types or element parameters.
See Selecting Elements Using a Filter
separation line See
setback (1) The distance that a wall sweep or wall reveal is offset from intersecting wall inserts. The setback
value allows you to place sweeps or reveals properly near window or door trims. You can define a default
setback for wall sweeps and wall reveals in their type properties.
setback (2) The legally required distance between the property line and buildings. For example, in the
following site plan, a red dashed line indicates the zoning setback.
setback (3) The distance from the connection point of a primary beam in a join to its edge. This is measured
linearly with a connecting beam's center.
For more information, see
1556 | Glossary
on page 270.
on page 271.
room separation line on page 1448.
Beam Cutback on page 782.