Figure 36: Network Topology For Mstp - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos
Table 216: Components of the Topology for Configuring MSTP on EX Series Switches
Property
Switch 1
Switch 2
1542
®
OS for EX Series Ethernet Switches, Release 10.3

Figure 36: Network Topology for MSTP

The interfaces shown in Table 216 on page 1542 will be configured for MSTP.
NOTE: You can configure MSTP on logical or physical interfaces. This example
shows MSTP configured on logical interfaces.
Settings
The following ports on Switch 1 are connected in this way:
is connected to Switch 2
ge-0/0/9
is connected to Switch 4
ge-0/0/13
ge-0/0/11 is connected to Switch 3
The following ports on Switch 2 are connected in this way:
is connected to Switch 1
ge-0/0/14
is connected to Switch 3
ge-0/0/18
Copyright © 2010, Juniper Networks, Inc.