Reset Mac-Authentication Statistics - HP FlexNetwork 7500 Series Command Reference Manual

Examples
# Remove the user with MAC address 1-1-1 from the MAC authentication guest VSI on
Ten-GigabitEthernet 1/0/1.
<Sysname> reset mac-authentication guest-vsi interface ten-gigabitethernet 1/0/1
mac-address 1-1-1
Related commands
display mac-authentication
mac-authentication guest-vsi

reset mac-authentication statistics

Use reset mac-authentication statistics to clear MAC authentication statistics.
Syntax
reset mac-authentication statistics [ interface interface-type interface-number ]
Views
User view
Predefined user roles
network-admin
mdc-admin
Parameters
interface interface-type interface-number: Specifies a port by its type and number. If you do not
specify a port, this command clears both global and port-specific MAC authentication statistics.
Examples
# Clear MAC authentication statistics on Ten-GigabitEthernet 1/0/1.
<Sysname> reset mac-authentication statistics interface ten-gigabitethernet 1/0/1
Related commands
display mac-authentication
231