Reset Dhcp Server Statistics; Static-Bind Client-Identifier - HP A5120 EI Series Command Reference Manual

reset dhcp server statistics

Syntax
reset dhcp server statistics
View
User view
Default level
2: System level
Parameters
None
Description
Use the reset dhcp server statistics command to clear the statistics of the DHCP server.
Related commands: display dhcp server statistics.
Examples
# Clear the statistics of the DHCP server.
<Sysname> reset dhcp server statistics

static-bind client-identifier

Syntax
static-bind client-identifier client-identifier
undo static-bind client-identifier
View
DHCP address pool view
Default level
2: System level
Parameters
client-identifier: Specifies the client ID of a static binding, a string with 4 to 160 characters in the format of
H-H-H..., each H indicates 4 hex digits except the last H indicates 2 or 4 hex digits. For example, aabb-
cccc-dd is a valid ID, but aabb-c-dddd and aabb-cc-dddd are both invalid.
Description
Use the static-bind client-identifier command to specify the client ID of a static binding in a DHCP
address pool.
Use the undo static-bind client-identifier command to remove the client ID of a static binding from a
DHCP address pool.
By default, no client ID is specified.
Use the static-bind client-identifier command together with the static-bind ip-address command to
accomplish a static binding configuration.
The ID of the static binding of a client must be identical to the ID displayed by using the display dhcp
client verbose command on the client. Otherwise, the client cannot obtain an IP address.
45