Reset Smart-Link Statistics - HP 6125G Command Reference Manual

undo protected-vlan [ reference-instance instance-id-list ]
View
Smart link group view
Default level
2: System level
Parameters
reference-instance instance-id-list: Specifies the MSTIs you want to reference in the form of instance-id-list
= { instance-id [ to instance-id ] }&<1- 1 0>. The instance-id argument is an MSTI ID that ranges from 0 to
32. A value of 0 represents the common internal spanning tree (CIST). &<1- 1 0> means that you can
specify up to 10 MSTI IDs or ID ranges. You can use the display stp region-configuration command to
display the instance-to-VLAN mappings.
Description
Use protected-vlan to configure protected VLANs for a smart link group.
Use undo protected-vlan to remove the protected VLAN configuration of the smart link group.
By default, no protected VLAN is configured for a smart link group.
If the reference-instance instance-id-list option is specified, the undo protected-vlan command removes
configuration of VLANs mapped to the specified MSTIs. Otherwise, the command removes configuration
of all protected VLANs.
Before you assign ports to a smart link group, configure protected VLANs for the smart link group.
You can remove the protected VLAN configuration of a smart link group when the group is empty but not
after a member port is assigned to it.
Removing a smart link group also removes its protected VLAN configuration.
If the VLANs mapped to a referenced MSTI change, the protected VLANs also change.
Configure the VLANs to which the member ports of a smart link group belong as the protected VLANs of
the smart link group.
Related commands: smart-link group; display stp region-configuration (Layer 2—LAN Switching
Command Reference).
Examples
# Map VLANs 1 through 30 to MSTI 1, activate the MST region configuration, and configure the VLANs
mapped to MSTI 1 as the protected VLANs of smart link group 1.
<Sysname> system-view
[Sysname] stp region-configuration
[Sysname-mst-region] instance 1 vlan 1 to 30
[Sysname-mst-region] active region-configuration
[Sysname-mst-region] quit
[Sysname] smart-link group 1
[Sysname-smlk-group1] protected-vlan reference-instance 1

reset smart-link statistics

Syntax
reset smart-link statistics
82