Non-Stop-Routing; Reset Spbm Bvlan-Info Statistics - HP FlexFabric 5930 Series Command Reference Manual

<Sysname> system-view
[Sysname] spbm
[Sysname-spbm] multicast-bvlan enable

non-stop-routing

Use non-stop-routing to enable NSR for SPBM.
Use undo non-stop-routing to restore the default.
Syntax
non-stop-routing
undo non-stop-routing
Default
NSR is disabled for SPBM.
Views
SPBM view
Predefined user roles
network-admin
Usage guidelines
NSR and Graceful Restart are mutually exclusive. You cannot use them at the same time.
Examples
# Enable NSR for SPBM.
<Sysname> system-view
[Sysname] spbm
[Sysname-spbm] non-stop-routing

reset spbm bvlan-info statistics

Use reset spbm bvlan-info statistics to clear B-VLAN statistics.
Syntax
reset spbm bvlan-info statistics slot slot-number
Views
User view
Predefined user roles
network-admin
Parameters
slot slot-number: Specifies an IRF member device by its member ID.
Examples
# Clear all B-VLAN statistics.
<Sysname> reset spbm bvlan-info statistics slot 1
60