Configuring A Time Range - HP 830 Series Configuration Manual

IPv6 ACL configuration procedure
Step
1.

Configuring a time range.

2. Adding an IPv6 ACL.
3. Configuring a rule for a basic IPv6 ACL.
4. Configuring a rule for an advanced IPv6
ACL.
Configuring a time range
1. Select QoS > Time Range from the navigation tree.
2. Click the Create tab to enter the time range configuration page.
Figure 468 Adding a time range
3. Configure a time range as described in
4. Click Apply.
Remarks
Optional.
Add a time range. A rule referencing a time range takes effect
only during the specified time range.
Required.
Add an IPv6 ACL. The category of the added IPv6 ACL
depends on the ACL number that you specify.
Required.
Complete one of the tasks according to the ACL category.
Table 135.
454