Configuring A Time Range - HP V1910 User Manual

Configuring a time range

Select QoS  Time Range from the navigation tree and then select the Create tab to enter the time range
configuration page, as shown in a.
The page for creating a time range
a.
2 describes the configuration items for creating a time range.
Time range configuration items
2.
Item
Time Range Name
Periodic
Time Range
Absolute
Time Range
Description
Set the name for the time range.
Start Time Set the start time of the periodic time range.
Set the end time of the periodic time range. The end time must
End Time
be greater than the start time.
Sun, Mon,
Select the day or days of the week on which the periodic time
Tue, Wed,
range is valid. You can select any combination of the days of
Thu, Fri,
the week.
and Sat.
Set the start time and date of the absolute time range. The time
From of the day is in the hh:mm format (24-hour clock), and the date
is in the MM/DD/YYYY format.
413
You can define
both a periodic
time range and
an absolute
time range to
create a
compound time
range. This
compound time
range recurs on
the day or days