Display Dhcp Relay Statistics - HP E4510-48G Command Reference Manual

all: Displays the information of all DHCP server groups.
Description
Use the display dhcp relay server-group command to display the configuration information of a
specified or all DHCP server groups.
Examples
# Display IP addresses of DHCP servers in DHCP server group 1.
<Sysname> display dhcp relay server-group 1
No.
1
2
Table 5-4 display dhcp relay server-group command output description
No.
Group IP

display dhcp relay statistics

Syntax
display dhcp relay statistics [ server-group { group-id | all } ]
View
Any view
Default Level
1: Monitor level
Parameters
group-id: Specifies a server group number in the range of 0 to 19 about which to display DHCP packet
statistics.
all: Specifies all server groups about which to display DHCP packet statistics. Information for each
group will be displayed.
Description
Use the display dhcp relay statistics command to display DHCP packet statistics related to a
specified or all DHCP server groups.
Note that if no parameter (server-group and all) is specified, all DHCP packet statistics on the relay
agent will be displayed.
Examples
# Display all DHCP packet statistics on the relay agent.
<Sysname> display dhcp relay statistics
Group IP
1.1.1.1
1.1.1.2
Field
Sequence number
IP address in the server group
5-17
Description