Ip Address Dhcp-Alloc - HP E4510-48G Command Reference Manual

Field
DNS server
Domain name
Boot server
Client ID
T1 will timeout in 1 day 11 hours
58 minutes 52 seconds.

ip address dhcp-alloc

Syntax
ip address dhcp-alloc [ client-identifier mac interface-type interface-number ]
undo ip address dhcp-alloc
View
Interface view
Default Level
2: System level
Parameters
client-identifier mac interface-type interface-number: Specifies the MAC address of an interface
using which as the client ID to obtain an IP address.
Description
Use the ip address dhcp-alloc command to configure an interface to use DHCP for IP address
acquisition.
Use the undo ip address dhcp-alloc command to cancel an interface from using DHCP.
By default, an interface does not use DHCP for IP address acquisition.
Note that:
If no parameter is specified, the client uses a character string comprised of the current interface
name and MAC address as its ID for address acquisition.
The DHCP client sends a DHCP-RELEASE message for releasing the IP address obtained via
DHCP, if the interface of the client is down, the message cannot be sent.
For a sub interface that obtained an IP address via DHCP, using the shutdown command on its
primary interface does not make the DHCP client send a DHCP-RELEASE message for releasing
the sub interface's IP address.
Examples
# Configure VLAN-interface 1 to use DHCP for IP address acquisition.
<Sysname> system-view
The DNS server address assigned to the client
The domain name suffix assigned to the client
PXE server addresses (up to 16 addresses) specified for the
DHCP client, which are obtained through Option 43.
Client ID
How long the T1 (1/2 lease time) timer will timeout.
6-3
Description