Ip Address Bootp-Alloc - HP E4510-48G Command Reference Manual

Vlan-interface1 BOOTP client information:
Allocated IP: 169.254.0.2 255.255.0.0
Transaction ID = 0x3d8a7431
Mac Address 00e0-fc0a-c3ef
Table 8-1 display bootp client command output description
Field
Vlan-interface1 BOOTP client
information
Allocated IP
Transaction ID
Mac Address

ip address bootp-alloc

Syntax
ip address bootp-alloc
undo ip address bootp-alloc
View
Interface view
Default Level
2: System level
Parameters
None
Description
Use the ip address bootp-alloc command to enable an interface to obtain an IP address through
BOOTP.
Use the undo ip address bootp-alloc command to disable the interface from obtaining an IP address
through BOOTP.
By default, an interface does not obtain an IP address through BOOTP.
Related commands: display bootp client.
Examples
# Configure VLAN-interface 1 to obtain IP address through BOOTP protocol.
<Sysname> system-view
Information of the interface serving as a BOOTP client
BOOTP client's IP address allocated by the BOOTP server
Value of the XID field in a BOOTP message, namely, a random
number chosen while the BOOTP client sends a BOOTP request
to the BOOTP server. It is used to match a response message
from the BOOTP server. If the values of the XID field are different
in the BOOTP response and request, the BOOTP client will drop
the BOOTP response.
MAC address of a BOOTP client
8-2
Description