Display Dhcp Relay Security - HP E4510-48G Command Reference Manual

interface interface-type interface-number: Displays the Option 82 configuration information of a
specified interface.
Description
Use the display dhcp relay information command to display Option 82 configuration information on
the DHCP relay agent.
Examples
# Display the Option 82 configuration information of all interfaces.
<Sysname> display dhcp relay information all
Interface: Vlan-interface100
Status: Enable
Strategy: Replace
Format: Verbose
Circuit ID format-type: HEX
Remote ID format-type: ASCII
Node identifier: abaci
User defined:
Circuit ID: company001
Interface: Vlan-interface200
Status: Enable
Strategy: Keep
Format: Normal
Circuit ID format-type: HEX
Remote ID format-type: ASCII
User defined:
Remote ID: device001

display dhcp relay security

Syntax
display dhcp relay security [ ip-address | dynamic | static ]
View
Any view
Default Level
1: Monitor level
Parameters
ip-address: Displays the binding information of an IP address.
dynamic: Displays information about dynamic bindings.
static: Displays information about static bindings.
Description
Use the display dhcp relay security command to display information about bindings of DHCP relay
agents. If no parameter is specified, information about all bindings will be displayed.
5-14