NTP-B88 Modify Line Settings and PM Parameter Thresholds for Electrical Ports
Table 10-1 Line Options for DS-1 Ports
Parameter
Port #
Port
Line Type
Line Coding
Line Length
State
AINS Soak
Table 10-2
Table 10-2 Line Thresholds Options for DS-1 Ports
Parameter
Port
CV
ES
Cisco ONS 15327 Procedure Guide, R4.0
10-4
Description
Port number
Port name
Defines the line framing type
Defines the DS-1
transmission coding type
Defines the distance (in feet)
from backplane connection to
the next termination point
Places port in service,
out of service,
out of service-maintenance,
or out of service-auto in
service.
Automatic in-service soak
describes the values on the Provisioning > Line Thresholds subtab for the DS-1 ports.
Description
Port number
Coding violations
Errored seconds
Options
1 to 14 (XTC-14)
•
1 to 28 (XTC-28-3)
•
User-defined, up to 32 alphanumeric/special
characters. Blank by default
See
DLP-B314 Assign a Name to a Port, page
•
D4
•
ESF - Extended Super Frame
Unframed
•
AMI - Alternate Mark Inversion (default)
•
B8ZS - Bipolar 8 Zero Substitution
•
0 - 131 (default)
•
132 - 262
•
263 - 393
•
•
394 - 524
•
525 - 655
IS
•
OOS
•
OOS_MT
•
OOS_AINS
•
•
Duration of valid input signal in hh.mm after
which the port is set in service by the software.
•
0 to 48 hours, 15 minutes increments.
Options
1 to 14 (XTC-14)
•
1 to 28 (XTC-28-3)
•
Numeric. Can be set for 15-minute or
one-day intervals. Select the bullet and
click the Refresh button.
Numeric. Can be set for 15-minute or
one-day intervals. Select the bullet and
click the Refresh button.
Chapter 10
Change Port Settings
5-16.
March 2003