Rate Control - Siemens SCALANCE XC-200 Set Up And Configuration

4 Configuration file
4.2.5

Rate control

The rate limits of the individual ports are configured in the "Layer 2 > Rate Control"
menu. The purpose is to limit the spread of broadcasting storms in the event of a
fault. The following settings are provided for the Service Bridge:
Layer 2 > Rate Control
Figure 4-11
(1) The function "Limit Ingress Broadcast" is activated for all ports. This means
that the data rate for incoming Broadcast message frames is restricted to the
"Total Ingress Rate" (2).
Service Bridge – Setup and Configuration
Entry ID: 109747975, V1.4,
1
05/2019
2
47