Layer 3 functions
9.3 OSPFv2
Result
The list is displayed.
9.3.10
show ip ospf virtual-links
Description
This command shows an overview of the virtual connections.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameter assignment:
show ip ospf virtual-links
Result
The overview is displayed.
9.3.11
show ip ospf area-range
Description
This command shows the grouped address ranges.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call up the command with the following parameters:
show ip ospf {area-range|summary-address }
368
or
cli#
or
cli#
SCALANCE XM-400/XR-500 Command Line Interface
Configuration Manual, 05/2014, C79000-G8976-C252-07