Confirming The Communication State On The Got Side (For Ethernet Connection) - Mitsubishi Electric GOT2000 Series Connection Manual

1.6.2 Confirming the communication state on the GOT side (For Ethernet
connection)

Confirming the communication state on Windows
(1) When using the Command Prompt of Windows
Execute a Ping command at the Command Prompt of Windows
(a) When normal communication
C:\>Ping 192.168.3.18
Reply from 192.168.3.18: bytes=32 time<1ms TTL=64
(b) When abnormal communication
C:\>Ping 192.168.3.18
Request timed out.
(2) When using the [TEST] of GT Designer3
Select [Communication] → [Communication settings] from the menu to display [TEST].
1.
2.
(3) When abnormal communication
At abnormal communication, check the followings and execute the Ping command or [TEST] again.
• Mounting condition of Ethernet communication unit
• Cable connecting condition
• Confirmation of [Communication Settings]
• IP address of GOT specified by Ping command
®
, GT Designer3
®
®
.
1.
Set the [PC side I/F] to the [Ethernet].
2.
Specify the [GOT IP Address] of the
[Communication Configuration] and click the
[Test] button.
3.
Check if GT Designer3 has been connected
to the GOT.
3.
1. PREPARATORY PROCEDURES FOR MONITORING
1.6 Checking for Normal Monitoring
1
1 - 27