Qos Commands; Introduction; Chapter 40: Qos Commands - Allied Telesis x510-28GTX Command Reference Manual

40

Introduction

Overview This chapter provides an alphabetical reference for Quality of Service commands.
QoS uses ACLs. For more information about ACLs, see the
and Configuration
Command List •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
C613-50170-01 Rev B

QoS Commands

Guide.
"class" on page 1613
"class-map" on page 1614
"clear mls qos interface
"default-action" on page 1616
"description (QoS policy-map)" on page 1617
"egress-rate-limit" on page 1618
"match access-group" on page 1620
"match cos" on page 1622
"match dscp" on page 1623
"match eth-format protocol" on page 1624
"match inner-cos" on page 1627
"match inner-vlan" on page 1628
"match ip-precedence" on page 1629
"match mac-type" on page 1630
"match tcp-flags" on page 1631
"match vlan" on page 1632
"mls qos cos" on page 1633
"mls qos enable" on page 1634
"mls qos map cos-queue
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
policer-counters" on page 1615
to" on page 1635
ACL Feature Overview
1611