Table of Contents
Advertisement
DHCP S
C
NOOPING
OMMANDS
IP DHCP SNOOPING TRUST
ip dhcp snooping trust
Overview
Use this command to set the ports to be DHCP snooping trusted ports.
Use the no variant of this command to return the ports to their default as untrusted
ports.
Syntax
ip dhcp snooping trust
no ip dhcp snooping trust
Default
All ports are untrusted by default.
Mode
Interface Configuration (port)
Usage
Typically, ports connecting the switch to trusted elements in the network (towards
the core) are set as trusted ports, while ports connecting untrusted network
elements are set as untrusted. Configure ports connected to DHCP servers as
trusted ports.
Example
To set switch ports 1.0.1 and 1.0.2 to be trusted ports, use the commands:
awplus#
awplus(config)#
awplus(config-if)#
Related
show ip dhcp snooping interface
Commands
C613-50103-01 REV A
configure terminal
interface port1.0.1-port1.0.2
ip dhcp snooping trust
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
1867
Advertisement
Table of Contents
