Egress-Vlan-Name - Allied Telesis x310-26FT Command Reference Manual

L RADIUS S C
OCAL ERVER OMMANDS
- -
EGRESS VLAN NAME

egress-vlan-name

Overview Use this command to configure the standard RADIUS attribute
"Egress-VLAN-Name (58)" for the local RADIUS server user group.
Use the no variant of this command to remove the Egress-VLAN-Name attribute
from the local RADIUS server user group.
Syntax egress-vlan-name <vlan-name> [tagged|untagged]
no egress-vlan-name
Default By default, no Egress-VLAN-Name attributes are configured.
Mode RADIUS Server Group Configuration
Usage When a Voice VLAN is configured for dynamic VLAN allocation
vlan
information when an IP phone is successfully authenticated. Use either the
egress-vlan-id
tagged parameter.
Examples To configure the "Egress-VLAN-Name" attribute for the RADIUS server user group
NormalUsers with the VLAN name vlan2 and all frames on this VLAN tagged, use
the commands:
awplus#
awplus(config)#
awplus(config-radsrv)#
awplus(config-radsrv-group)#
To delete the "Egress-VLAN-Name" attribute for the NormalUsers group, use the
commands:
awplus#
awplus(config)#
awplus(config-radsrv)#
awplus(config-radsrv-group)#
C613-50103-01 REV A
Parameter Description
<vlan-name>
The VLAN name to be configured as the Egress-VLAN-Name
attribute.
tagged
Set frames on the VLAN as tagged. This sets the tag indication field
to indicate that all frames on this VLAN are tagged.
untagged
Set all frames on the VLAN as untagged. This sets the tag indication
field to indicate that all frames on this VLAN are untagged.
command), the RADIUS server must be configured to send the VLAN
command or the
configure terminal
radius-server local
configure terminal
radius-server local
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
egress-vlan-name command, and specify the
group NormalUsers
egress-vlan-name vlan2 tagged
group NormalUsers
no egress-vlan-name
(switchport voice
1791