Table of Contents
Advertisement
VRRP C
OMMANDS
6
SHOW VRRP IPV
show vrrp ipv6
Overview
Use this command to display information about all configured VRRPv3 IPv6
sessions for all interfaces, or all VRRPv3 IPv6 sessions for a given interface with the
optional parameter.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
See the
about VRRPv3 IPv6 configuration details.
show vrrp ipv6 [<interface>]
Syntax
Mode
User Exec and Privileged Exec
Example
To display information about all VRRPv3 IPv6 sessions, enter the command:
awplus#
Output
Figure 48-6: Example output from the show vrrp ipv6 vlan2 command
Related
enable (VRRP)
Commands
disable (VRRP)
C613-50103-01 REV A
VRRP Feature Overview and Configuration Guide
Parameter
Description
<interface>
Specify the name of the interface that will participate in the virtual
routing. The interface must exist on the router. The interface
specified sends and receives VRRPv3 IPv6 advertisement messages.
show vrrp ipv6
awplus#show vrrp ipv6 vlan2
VrId <1>
State is Master
Virtual IP is fe80::202:b3ff:fed5:983e (Owner)
Interface is vlan2
Priority is 255
Advertisement interval is 4 sec
Preempt mode is FALSE
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
"Getting Started
Guide.
for more information
1981
Advertisement
Table of Contents
