Chapter 77: Quality Of Service (Qos) Commands; Table 146. Quality Of Service Commands - Allied Telesis AT-9000 Series User Manual

Chapter 77
Quality of Service (QOS) Commands
Command
"MLS QOS ENABLE" on page 1311
"MLS QOS MAP COS-QUEUE" on
page 1312
"MLS QOS MAP DSCP-QUEUE" on
page 1314
"MLS QOS QUEUE" on page 1316
"MLS QOS SET COS" on page 1317
"MLS QOS SET DSCP" on page 1318
"MLS QOS TRUST COS" on
page 1319
"MLS QOS TRUST DSCP" on
page 1320
"NO MLS QOS ENABLE" on
page 1321
"NO WRR-QUEUE WEIGHT" on
page 1322
"SHOW MLS QOS INTERFACE" on
page 1323
The Quality of Service (QoS) commands are summarized in Table 146.

Table 146. Quality of Service Commands

Global
Configuration
Port Interface
Port Interface
Port Interface
Port Interface
Port Interface
Port Interface
Port Interface
Global
Configuration
Port Interface
Privileged Exec
Mode
Activates QoS on the switch.
Maps CoS priorities to port egress
queues.
Maps DSCP priorities to port egress
queues.
Configures the default egress queue
for any packet arriving on the port.
Remarks all egress packets on a port
with the specified CoS value.
Remarks all egress packets on a port
with the specified DSCP value.
Configures ports to use the CoS
priorities in ingress packets to
determine the queues on the egress
ports.
Configures ports to use the DSCP
priorities in ingress packets to
determine the appropriate queues on
the egress ports to store the packets.
Disables QoS on the switch.
Set the CoS scheduling method on
the ports to strict priority.
Display the scheduling methods of the
ports and, for weighted round robin
scheduling, the assignments of
weights to egress queues.
Description
1309