Vlan (Radius Server) - Allied Telesis x310-26FT Command Reference Manual

L RADIUS S C
OCAL ERVER OMMANDS
(RADIUS )
VLAN SERVER

vlan (RADIUS server)

Overview Use this command to set the VLAN ID or name for the local RADIUS server user
group. The VLAN information is used for authentication with the dynamic VLAN
feature.
Use the no variant of this command to clear the VLAN ID or VLAN name for the local
RADIUS server user group.
vlan {<vid>|<vlan-name>}
Syntax
no vlan
Default VLAN information is not set by default.
Mode RADIUS Server Group Configuration
Examples The following commands set VLAN ID 200 to the group named NormalUsers:
awplus#
awplus(config)#
awplus(config-radsrv)#
awplus(config-radsrv-group)#
The following commands remove VLAN ID 200 from the group named
NormalUsers:
awplus#
awplus(config)#
awplus(config-radsrv)#
awplus(config-radsrv-group)#
Related group
Commands
show radius local-server user
C613-50103-01 REV A
Parameter Description
<vid>
VLAN ID.
<vlan-name>
VLAN name.
configure terminal
radius-server local
configure terminal
radius-server local
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
group NormalUsers
vlan 200
group NormalUsers
no vlan
1813